
5950 E Brown Rd, Mesa AZ 85205
Mobile | Marine | Motorsports | Motorcycle
Window Tinting | Safety & Convenience | PPF | Custom Boxes | Smart Start Interlock


Largest single store Rockford Fosgate Dealer in U.S. since 2013
(480) 396-9003
FREE Shipping on ONLINE Orders over $99.99
We accept Debit, Credit, and Financing with SNAP Finance,

Come Shop Online
In addition to Debit and Credit cards we also accept financing through SNAP Finance.
Welcome to our online store!
Before placing an order, please contact us at 480-396-9003 for fitment information on our products. Returns will not be accepted on orders where the fitment information is incorrect.

P1000X5
Punch 1,000 Watt Class-bd 5-Channel Amplifier
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.
The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.
FEATURES AT A GLANCE
- On-board Punch EQ with +18dB boost @ 45Hz
- 12dB/octave Butterworth crossover
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High level input capable with Auto Turn-On circuit
- Short circuit protection
- Muted turn on
- Stealth top mounted control panel
- 2/4 channel input switch
- Over current protection
- Features C.L.E.A.N. Set-up
- Cast aluminum heatsink
- 1 Year Warranty
- Infrasonic filter
SPECIFICATIONS
| Cta-2006 Compliant | Remote Controls | Optional Punch Level Control (PLC2) Ready | |
| Number of Channels | 5 | Visual Indicators | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Total Power (Sum of Rated Power) |
1000 Watts | Power Wire Gauge | 4 AWG |
| Rated Power (RMS Continuous Power) |
75 Watts x 4 + 150 Watts x 1 @ 4Ω 125 Watts x 4 + 300 Watts x 1 @ 2Ω N/A Watts x 4 + 500 Watts x 1 @ 1Ω 250 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged |
Power Input Connector | Block |
| Dynamic Power (PVC/PowerCube®) |
115 Watts x 4 + 299 Watts x 1 @ 4Ω 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2Ω 0° Res N/A Watts x 4 + 863 Watts x 1 @ 1Ω 0° Res 380 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged 0° Res |
Speaker Wire Gauge | 12 AWG |
| Bridgeable | Yes (front/rear channels) | Speaker Output Connector | Block |
| Frequency Response | Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB |
Cooling | Convection |
| Input Sensitivity | 150 mV - 12 V | Heatsink | |
| Circuit Topology Class | Class A/B + Class BD (Sub) | Operating Voltage | 9 - 16 VDC |
| Efficiency (average) | Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm |
Recommended Fuse (not included) |
150 A |
| Total Harmonic Distortion (THD+Noise) | <1.0% | Average Current Draw (13.8V Music) | 75 A |
| Signal Input | Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch |
Max. Current Draw (13.8V Sinewave) | 150 A |
| Signal Output | -- | Suggested Alternator | 100 A |
| Tone Controls | Sub: 0dB to +18dB @ 45Hz |
Dimensions (H x W x D) | 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
| Crossover Controls | Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave |
Shipping Weight | 15.3 Lbs. (6.93 Kg.) |
Get financed with SNAP Finance, and buy online.
Once approved SNAP will issue a virtual card number that you then use like a credit card
to make your online purchase.

